REINFORCED ACRYLIC TILE ADHESIVE
CLASSIFICATION: C2TE according to EN 12004
Powerful High Performance cement-based resinous acrylic tile adhesive with special acrylic enhancive additives of excellent quality. With zero slip (T), large open application time (E) it also contains inert materials of selected granulometry, excellent workability high adhesion ability, and high durability to extreme temperature conditions (heat, frost) and perfect behaviour in all kinds of stresses. It is classified as type C2 ΤΕ tile adhesive according to EN 12004 standard.
Fields of application
Recommended for bonding ceramic tiles, granite tiles, natural stones, marbles, absorbent or non-absorbent, indoor and outdoor, wall and flooring with application thickness up to 10mm.
Instructions for use
The substrate to be coated must be free of dust, paint, oil, loose material etc. capable of carrying the additional load. On flimsy substrates or substrates with high absorbency (plasterboards, aerated concrete etc.) it is recommended to apply the SYSTEM TECHNICA TECHNOFLEX product 1-2 hours before application of the adhesive. On smooth non-absorbent surfaces it is recommended the use of SYSTEM TECHNICA SUPER CONTACT quartz primer. For best result it is recommended to wet the surface before the application. The content of the bag is mixed in a ratio of 25kg of adhesive with 6.7liters of clean water (± 0.25liters) until a homogeneous mixture is formed. Leave the mixture to settle for 5-7 minutes and then stir it again without adding water with a low revolution mixer. The glue mixture is ready for use and its coagulation time is 3 to 4 hours depending on temperature. During this time, the mixture is mixed periodically, but no further water is added. Coating the adhesive on the surface is uniformly applied by means of a suitable notched trowel. The placement of the tiles to be fixed should be done within 30 minutes of the coating of the adhesive. Application temperature is between 5 and 35 ° C.
2.5 – 4.5kg /m², depending on the nature of the substrate, tile size and the trowel’s notch size.
Keep in a room with low humidity and store on pallets up to One year from the date of production and always in sealed package.
Available in bags of 25kg
The product is also produced under the tradenames SUPER A30 and SUPER MAX30