ACRYLIC ADHESIVE FOR NATURAL STONES AND PAVEMENT PLATES
CLASSIFICATION: C1 according to EN 12004
Special acrylic adhesive with very high durability to hard temperature conditions. Suitable for the installation of cement pavement plates, stone plates, ceramic tiles and cotto tiles, as well as for the fixing of decorative tiles and many other decorative elements. Suitable for the placement of tiles either indoors or outdoors.
Instructions of use
SYSTEM TECHNICA – TERRA can be used for the placement of tiles on floors or walls with common substrates, but under the condition that these are dry, hard and are appropriately prepared. The surface to be covered should be free of any dust, paint, oils etc. Flimsy substrates with a presence of moisture can scientifically delay its congealment. For rotten substrate or substrate with acute absorbency (plaster), the spreading of the SYSTEM TECHNICA TECHNOFLEX is recommended for at least 1 to 2 hours before the application of the adhesive.
The content of the bag is mixed in a ratio of 25kg of adhesive with 5.75 lit of clean water (± 0.25 lit) until a homogeneous mixture is obtained. Leave the mixture to settle for 5-7 minutes and then stir it again without adding water with a low revolution mixer. The mixture is ready for use and its coagulation time is 1 to 2 hours depending on temperature. During this time, the mixture is mixed periodically, but no further water is added. Coating the adhesive on the surface is uniformly applied by means of a suitable notched trowel. The placement of the tiles should be done within 20 minutes of the coating of the adhesive. The preparation and coating of the adhesive is best to be done within 5 and 35 ° C.
2.5 – 4.5 kg/m² depending on the trowel’s notch, the type of tile and size and the nature of the substrate.
Keep in a room with low humidity and still on pallets up to one year from the date of production and always in sealed package.
Available in bags of 25kg.